ECOS Innosilicon T2 Turbo 30TH/s Review and Profitability Calculation Estimate
| PRICE | PAY BACK PERIOD | WEBSITE | |
|---|---|---|---|
| $1,137 | Never | Visit Website | 
|
| Calculation Parameters | |
|---|---|
| Power Consumption (Watts) | 2200 W |
| Electricity Cost (per KWh) | $0.1 |
| Coin | bitcoin |
| Manufacturer | Innosilicon |
| Hashrate | 30.0000000000 TH/s |
| Algorithm | SHA-256 |
| Payback | Never |
| Contract Duration | 226 days |
| Estimated Power Cost | |
| Daily Power Cost | $5.28 |
| Weekly Power Cost | $36.96 |
| Monthly Power Cost | $158.40 |
| Annual Power Cost | $1,927.20 |
| Estimated Revenue W/O Cost | |
| Daily Revenue | $1.78 |
| Weekly Revenue | $12.46 |
| Monthly Revenue | $53.40 |
| Annual Revenue | $649.70 |
| Estimated Profit After Cost | |
| Daily Profit | $-3.50 |
| Weekly Profit | $-24.50 |
| Monthly Profit | $-105.00 |
| Annual Profit | $-1,277.50 |
Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.
ECOS Innosilicon T2 Turbo 30TH/s Review 2025 Update
Innosilicon T2 Turbo 30Th/s also referred to as the T2T-30T was another miner manufactured by the Innosilicon Company. Available through cloud mining as well, the miner was released in August 2018 and was one of the formidable Bitcoin miners at the time.
The parent company specializes in high-speed mixed signals for ASICs and IPs. You get a miner produced with a proven record of over 200 tape-outs and 100% FinFET with the chips operating from 5nm to 55nm.
Features Innosilicon T2 Turbo 30Th/s
You get a miner achieving the maximum hashrate of 30 and a maximum power consumption of 2200W. It was one of the more preferred miners at the time for mining Bitcoin and other SHA-Algorithm related miners.
Miners got an easy to use and relatable miner that came with an Ethernet connection with a factory default hashrate of 29Th/s and 2100W.
You could balance the miner’s performance with a balance mode of 26Th/s and a maximum power consumption of 1900W. With the efficiency mode, miners would get 24Th/s and a maximum power consumption of 1620W.
The T2T-30T came with two fans for cooling and with a new chip parameter of 10nm. Suitable for home and industrial mining setup, the miner offered 72 decibels of noise. Voltage was 210-240V with humidity ranging from 5% to a maximum of 95%.
Please Note
For the miner to function properly, you required an AC cable with specific requirements such as IEC C14 AC power cable for the PSU. A dust-free environment was a must for the chip to work and fans to continue offering better cooling.
Innosilicon T2 Turbo 30 TH/s is a Bitcoin (BTC) miner sold by the ECOS cloud mining company. This miner is known to be well designed durable and efficient miner produced by Innosilicon.
The Innosilicon is a globally multiservice producer of speedy mixed-signal ASIC and IPs customization. Innosilicon is wholly devoted to manufacturing the world’s top advanced ASIC and IPs technologies. Innosilicon has a high-quality ASIC customization in mass manufacturing on processes over 55nm to 5nm, and has placed documentation for more than 200 tape-outs, and achieved a hundred thousand permitted FinFET wafers manufacturing each year, at a hundred percent success rate. The Innocilicon company still embarks on producing top chip solutions to go beyond the market expectations and making history through innovation.
Innocilicon T2 Turbo 30 TH/s also known as T2T-30T is able to mine Bitcoin with the maximum hash rate of 30 TH/s, for a power consumption of 2200W, making it a very profitable miner for its users. It has an AC input voltage of 210-240V and an Ethernet network connection which makes it very easy and simple to operate with. However, this device is highly recommended for profitable Bitcoin mining.
Innosilicon T2 Turbo 30T specifications
|
Manufacturer |
Innosilicon |
|
Model |
T2 Turbo 30T |
|
Also known as |
T2turbo30T (T2T-30T) |
|
Year Released Hash rate |
August 2018 30Th/s (+/-5%) |
|
Size dimension |
422mm (L) x 142mm (W) x 213mm (H) |
|
Net Weight |
9.49 kg |
|
Material |
Metal |
|
Chip size |
10nm |
|
Noise level |
72db |
|
Fan(s) |
2 |
|
Power consumption |
2200W ( +/- 10%, normal mode, at the wall, PSU efficiency: 93%, temperature: 25°C) |
|
Voltage |
12V |
|
Network connection Allowed ambient temperature range |
Ethernet 0°C to 40°C |
|
Humidity |
5 – 95 % |
The Innosilicon T2T - 30T has four work modes which are as follow
|
Miner |
High hash mode |
Factory mode / default |
Balanced mode |
Efficiency mode |
|
Hash rate |
30T ± 5% |
29T ± 5% |
26T ± 5% |
24T ± 5% |
|
Power consumption |
2200W ± 10% |
2100W ± 10% |
1900W ± 10% |
1620W ± 10% |
NOTE
-
This device is more than 2000W, users should get an AC cable with 3*2.0 specification, with three-wire cores with a diameter, not more than 2.0mm.
-
A standard IEC C14 AC power cable is needed for the PSU.
-
The 10A AC cable is recommended to reach the proper operating condition.
-
Make sure the device is kept in proper cooling and dust flitter environment to avoid damage.
